Skip Navigation

How to Assemble a Trampoline [Round and Rectangular]

How to Assemble a Trampoline [Round and Rectangular]

To assemble a round trampoline, start by laying out all the parts and verifying you have everything listed in the instruction manual. Connect the frame tubes together to form a complete circle. Attach the legs evenly around the frame to provide stability. Place the jumping mat in the center and attach the springs around it in a crisscross pattern to distribute tension evenly. Cover the springs with a protective pad and fasten it securely. For the enclosure, slide foam sleeves onto the poles and set up the safety net around them before inserting the poles into position.

How To assemble A round Trampoline

To assemble a rectangular trampoline, begin by aligning the frame sections and joining them with the corner and leg pieces. Apply lubricant to the joints for smooth assembly. Attach the legs while checking that the net pole holes line up properly. Use joiners to firmly secure the frame together. Start hooking the springs to the mat at the corners, working symmetrically outward. Place the safety pads on the frame, then erect the net poles into position. Finally, install the safety net, pulling it taut for maximum protection. Do a thorough inspection of all connections and parts.

How to Assemble a Rectangular Trampoline

Key Points

  • The tools needed for trampoline assembly include a power drill, rubber mallet, spring puller, gloves, and a spanner
  • The cost to assemble a trampoline ranges from $125 to $250, depending on the complexity of the design. More intricate trampolines cost more to assemble professionally.
  • The time required to assemble a trampoline can range from 30 minutes for a mini trampoline up to 4-5 hours for an extra-large model
  • The difficulty of assembling a trampoline can vary from quite simple for smaller trampolines to more challenging for large or complex designs. 
  • Preparing a flat, open workspace with overhead clearance is recommended for trampoline assembly. 
  • The springs should be attached evenly in a crisscross pattern to distribute tension appropriately across the jump mat. 
  • Common trampoline assembly problems include incorrect spring attachment and assembling on an uneven surface.
  • Trampoline assembly problems can be fixed by closely following instructions, properly preparing the workspace, and seeking help if needed

what tools are needed to assemble a trampoline

To assemble a trampoline, you definitely need certain tools such as a power drill or screwdriver, rubber mallet, spring puller, gloves, and a spanner or Allen key. These tools ensure a smooth and secure assembly process.

  • A power drill speeds up the attachment of bolts, while a screwdriver can also do the job, though it may take longer. 
  • The rubber mallet is crucial for connecting parts without damaging them. For attaching springs with ease and avoiding injury, a spring puller is your go-to tool. 
  • Gloves are essential for protecting your hands from scrapes and improving grip
  • Lastly, a spanner or Allen key will tighten everything, keeping the trampoline firm and wobble-free.

By using these specific tools, you guarantee a well-built trampoline that’s ready for hours of jumping joy. 

Each tool is designed to perform a key task in the assembly process, making it straightforward and safe.

Not only does this approach make the assembly quicker, but it also ensures that the trampoline will be safe for use, providing peace of mind along with fun.

How to Setup Different Types of Trampolines [Trampolines Assembly]

Trampoline assembly varies depending on the model and brand, with specific instructions for round and rectangular types.

To begin, the assembly of a Skywalker round trampoline involves laying out all components, attaching the frame sections, and securing the jumping mat with springs.

In contrast, setting up an Upper Bounce round trampoline and a GeeTramp rectangular trampoline will have unique steps tailored to their design, which we will outline in the following sections.

How to Assemble SkyWalker round trampolines

Skywalker Trampolines 15′ Round Assembly Video

To assemble a Skywalker round trampoline, carefully follow these steps for a safe setup.

  • First, verify each piece against the manual’s list to ensure nothing is missing.
  • Next, connect the frame tubes to the T joints and sockets, ensuring a uniform layout. Attach the legs to the frame, and then raise the structure to form the circle.
  • Spread the jump mat inside this circle and hook the springs around, balancing the tension. Fit the spring cover, fastening it down securely.
  • For the enclosure, cover the poles with foam sleeves and set up the net around it. Insert the poles into their positions, and your trampoline is ready for use.
  • Assembly begins with a parts check to confirm all components are present. This step prevents future interruptions during setup.
  • The frame construction is critical, requiring attention to detail when joining the tubes to form a sturdy base. Leg attachments increase stability, which is vital for safety during use.

The jump mat and springs are key to the trampoline’s function, so distributing springs evenly is essential to prevent uneven wear and potential damage.

Adding the spring pad protects users from the springs, enhancing safety. The enclosure installation, which includes foam sleeves and the net, is the last step and is crucial for preventing falls.

Once the enclosure poles are in place, the trampoline assembly is complete, offering a secure and enjoyable bouncing experience.

How to assemble upper bounce round trampoline

Upper Bounce Easy Assemble/Disassemble Trampolines

To assemble an Upper Bounce round trampoline, follow these steps

  1. Start by checking that you have all the necessary parts such as the frame, legs, jump mat, and safety features. 
  2. Put the frame together, ensuring each piece fits snugly. Next, attach the legs to the frame to provide support. 
  3. After the base is stable, hook the springs to the jump mat, using a T-hook to simplify the process. 
  4. Once the mat is in place, erect the side poles and pad them for safety. 
  5. Finally, install the safety net, checking that the entryway zips securely.

In the first step, lay out all the trampoline components on the ground. Make sure each part is accounted for and undamaged. The frame pieces should be connected to form a circle. Each leg should be fixed firmly to this circle.

After the framework is ready, spread the jump mat in the center. Use a T-hook to pull and hook the springs from the mat to the frame, distributing them evenly.

Set up the side poles around the trampoline next. Slide the foam padding onto each pole for protection.

To finish, drape the safety net around the poles and tie it down, ensuring the entrance closes properly for safe use.

How to Assemble GeeTramp Rectangular Trampoline

GeeTramp Force 8x12ft Rectangle Trampoline Assembly Instruction

To assemble a GeeTramp Rectangular Trampoline, simply follow each clear step for a safe setup.

  • Align and join the frame sections, utilizing the leg and corner pieces.
  • Apply lubricant to the joints for smooth assembly and prevent rust.
  • Attach the legs, checking the alignment of net pole holes.
  • Secure the frame with joiners, ensuring the structure is stable.
  • Hook the springs to the mat from the corners, working symmetrically.
  • Place the safety pads, followed by erecting the net poles.
  • Install the net, pulling it taut for maximum safety.
  • Perform a thorough inspection of all parts and connections.

Assembling this trampoline is a breeze if you follow these directives. Each component is designed for effortless installation, contributing to a trampoline that stands strong and secure for boundless enjoyment.

how much does it cost to assemble a trampoline?

The cost to assemble trampolines is as follows.

What is the assembly cost of Different Trampolines

Trampoline TypeCost Range
Traditional, spring-based trampolines$200 – $1,500+
Springless trampolines (above ground)$800 – $4,000+
Inground Trampolines$1,000 – $5,000+
rebounders Trampolines ( Bungee or Spring)$30 – $200+
Indoor trampolines (gymnastics)$500 – $5,000+
Water trampolines$300 – $3,000+
Different Types of Trampolines and Their Assembly Cost

What is the Cost of Assembling a Trampoline on the Basis of Size

Trampoline SizeCost
Compact Oval (6 ft x 9 ft)$999
Medium Oval (8 ft x 11 ft)$1,499
Large Oval (8 ft x 13 ft)$1,999
Cost of Assembling a Trampoline on the Basis of Size

What is the Cost of Assembling Trampoline Accessories

Trampoline AccessoriesCost Range
Trampoline Ladder$20 – $99+
Trampoline Anchor Kit$20 – $99+
Trampoline Cover$20 – $199+
Trampoline Basketball Hoop$30 – $199+
Cost of Assembling Trampoline Accessories

How much Trampoline Assembly Expert will Charge you

Trampoline Assembly Expert LevelCost Range
Low$125
Medium$180
High$250
How much Trampoline Assembly Expert will Charge you

Assembling a trampoline costs between $125 to $250. The price depends on the complexity of the trampoline design. Specialists who assemble trampolines ensure the structure is safe and sturdy. They check every part, use the right tools, and adhere to guidelines for secure assembly.

Choosing expert assembly services means your trampoline is set up correctly. The professionals take care of everything, from unpacking to final safety inspections. This thorough process is vital to avoid any harm during use.

Paying for professional assembly is investing in safety and durability. Having a specialist handle the setup provides a trampoline that is ready for enjoyment without any worries about improper installation.

how long does it take to assemble a trampoline

Mini/Rebounder

  • Size Range: 5 to 7 ft
  • Assembly Time: 30 mins to 1 hour

Standard Round Trampoline

  • Size Range:
    • 8 to 10 ft
    • 12 to 15 ft
  • Assembly Time (with assistance):
    • 8 to 10 ft: 1 to 2 hours
    • 12 to 15 ft: 2 to 2.5 hours
  • Assembly Time (alone):
    • 8 to 10 ft: 1 to 1.5 hours
    • 12 to 15 ft: 3 to 4 hours

Extra-large Round Trampoline

  • Assembly Time (with assistance): 4-5 hours

Rectangular Trampoline

  • Assembly Time (with assistance): 1-4 hours

Springfree Trampoline

  • Assembly Time (with assistance): Up to 2-3 hours
  • Note: Recommended to block out time on a Saturday with sufficient daylight.

Oval Trampoline

  • Assembly Time (with assistance): 1-2 hours
  • Assembly Time (alone): 2-5 hours

how hard is it to assemble a trampoline

Assembling a trampoline is a task that can range from simple to challenging, depending on the trampoline size and the assembler’s tool-handling skills. 

The process demands attention to detail, the ability to follow instructions, and basic tool-handling skills. Small trampolines often require minimal effort and basic tools, while big models need more hands and expertise.

Trampoline assembly contains key steps such as arranging all parts, following the manual and connecting pieces securely. 

  • It’s essential to start with a clear workspace and sort out all the trampoline components. 
  • Reading the manual thoroughly provides a clear roadmap for the task ahead. 
  • Tightening every bolt and ensuring each spring is correctly placed safeguard the trampoline’s stability and safety.

A systematic approach simplifies the task. Break down the process into smaller, manageable stages:

  1. Unpack and organize parts.
  2. Read through the entire set of instructions.
  3. Build the frame, attach the legs, and secure them.
  4. Fix the mat onto the frame using springs.
  5. Install the safety net and other accessories.

What are the instructions to follow when assembling a trampoline

To properly assemble a trampoline, follow these clear steps for a secure setup.

  1. Choose a flat, open outdoor space, ensuring it’s clear of obstacles and has a minimum of 24 feet of overhead clearance. This is the first rule for a safe assembly area.
  2. Begin by placing all the trampoline pieces on the ground. Look at the instruction manual to identify each part.
  3. Connect the frame tubes tightly. For round trampolines, arrange the pieces in a circle, and for rectangular ones, lay them out to form a rectangle.
  4. Attach the trampoline legs to the frame next, spacing them out evenly and securing them well.
  5. Place the jumping mat at the center of the frame. Then, hook the springs or bands from the mat to the frame in a crisscross pattern, keeping the tension equal.
  6. Set up the safety net by fixing the poles to the frame and then attaching the net to these poles. Check that the net is stretched out and fixed tightly, leaving no gaps.
  7. Do a final check of the trampoline before using it. Make sure every component is in the right spot and tightly fastened.
  8. Remove the ladder when not in use to prevent unsupervised access. Adult supervision is a must when the trampoline is being used.

Related Articles:

What are trampoline assembly problems and how to overcome these problems

What are Trampoline Assembly ProblemsHow to Overcome Trampoline Assembly Problems
Not reading the instructions carefullyAttaching springs incorrectly while assembling the jump mat
Not laying out all parts before beginning assemblyLay out and identify all parts before beginning
Not leveling the ground properly before setupLevel ground and plan space needed for full setup
Not considering backyard space needed for full setupTake 2-4 hours and don’t rush the process
Attach every 10th spring when assembling the matMistakenly thought assembly will be quick and easy
Faulty or incorrect net assemblyFollow net instructions carefully
Missing or damaged foam padsReplace any missing or damaged pads
Starting assembly without checking all partsCheck all parts are present before starting
Mistakenly thought assembly would be quick and easyWatch assembly videos for guidance
Rushing through the assembly processTape pole joints to avoid foam tearing
Misaligning enclosure pole tube holesFollow diagrams and steps correctly
Assembling the frame upside downOnly use provided parts in assembly
Using incorrect parts during assemblyPay extra attention to highlighted manual steps
Ignoring highlighted steps in the manualUse power tools, spring puller, mallet, gloves
What are trampoline assembly problems and how to overcome these problems

Trampoline assembly problems include issues like incorrect spring attachment and assembling on an uneven surface, but these can be overcome by following systematic instructions and preparing the setup area.

Begin by spreading out all the trampoline pieces to check them. Make sure the ground is flat for a stable setup. Allocate enough room and time to avoid hurrying. Attach springs in the right order to avoid extra tension. For help, use the manual, watch videos, or call customer support.

With patience and attention, assembling your trampoline will be rewarding and can even bring people together.

To prevent trampoline assembly problems:

  • Lay out and inspect all parts before starting.
  • Ensure the ground is level for a secure foundation.
  • Plan for ample space and avoid rushing the assembly.
  • Attach springs correctly to maintain balance.
  • Use the instruction manual, online tutorials, or customer support if you need guidance.

What are trampoline assembly instructions [PDF]

All the trampoline safety instructions are mentioned in this PDF. click the button to download now

Final Thoughts

The assembly of a trampoline, whether it is round or rectangular, requires a methodical approach, adherence to manufacturer instructions, and basic tools. The process varies in complexity and time investment, with costs for professional assembly differing accordingly.

Next time, do not worry about assembling a trampoline because this is not a hard task as it is considered.

Overcoming common assembly problems involves meticulous attention to detail and problem-solving skills. Proper assembly is crucial for ensuring the safety and longevity of the trampoline, thereby providing endless hours of enjoyment and exercise.

Author

  • Misbah Qamar

    Misbah Qamar is a talented writer and pharmacist who produces high-quality content for OnlyTrampoline.com. She earned her PharmD from the University of Sargodha and has extensive experience writing optimized, engaging articles for a variety of health and wellness blogs. Misbah Qamar has a knack for taking complex topics and breaking them down into easily understandable pieces for readers. She conducts thorough research and always keeps SEO best practices in mind when writing. Her articles provide readers with valuable insights and actionable advice.